INTMD=OUTPUT_TOO_LOW, RDYLOWTH=95_PERCENT
Module Configuration
| ILIMIT | Inductor Peak Current Limit. 1 (LIMIT1): Limit the peak inductor current to 200 mA. 2 (LIMIT2): Limit the peak inductor current to 300 mA. 3 (LIMIT3): Limit the peak inductor current to 400 mA. 4 (LIMIT4): Limit the peak inductor current to 500 mA. 5 (LIMIT5): Limit the peak inductor current to 600 mA. 6 (LIMIT6): Limit the peak inductor current to 700 mA. 7 (LIMIT7): Limit the peak inductor current to 800 mA. |
| INTMD | Interrupt Mode. 0 (OUTPUT_TOO_LOW): Generate an interrupt when the regulated converter output voltage is too low, according to the RDYLOWF flag. 1 (OUTPUT_NOT_TOO_LOW): Generate an interrupt when the regulated converter output voltage is not too low according to the RDYLOWF flag. 2 (OUT_OF_REG): Generate an interrupt when the output voltage is out of regulation. The converter output can be either too high or too low, according to the RDYLOWF and RDYHIGHF flags. 3 (IN_REG): Generate an interrupt when the output voltage is in regulation. |
| RDYLOWTH | Converter Ready Low Threshold. 0 (95_PERCENT): Hardware sets the RDYLOWF flag if the regulated output voltage is greater than 95% of the programmed output voltage. 1 (90_PERCENT): Hardware sets the RDYLOWF flag if the regulated output voltage is greater than 90% of the programmed output voltage. 2 (85_PERCENT): Hardware sets the RDYLOWF flag if the regulated output voltage is greater than 85% of the programmed output voltage. 3 (80_PERCENT): Hardware sets the RDYLOWF flag if the regulated output voltage is greater than 80% of the programmed output voltage. |